If you are budgeting for a new main gate in Dehradun in 2026, here is the short answer: stainless steel gates run Rs 500 to Rs 1,400 per sq ft depending on grade and design, and a typical 10x6 ft gate lands between Rs 45,000 and Rs 200,000 installed. Designer, laser-cut, larger or automatic-ready gates sit at the top of that range.

The 2026 Rate Card at a Glance

SS 202 (covered or indoor): Rs 500-815 per sq ft
SS 304 (outdoor standard, recommended): Rs 815-1,175 per sq ft
SS 304 designer or laser-cut: Rs 1,175-1,400 per sq ft
10x6 ft (60 sq ft) SS 202 gate, installed: around Rs 45,000
10x6 ft SS 304 gate, installed: around Rs 122,500
10x6 ft designer gate, installed: up to Rs 200,000

These are the live Dehradun bands we publish (updated 13 September 2026). The final number is always confirmed after a free site measurement.

SS Gate Price by Size (Dehradun 2026)

7 x 6 ft (42 sq ft): Rs 21,000 - 58,800
8 x 6 ft (48 sq ft): Rs 24,000 - 67,200
10 x 6 ft (60 sq ft): Rs 30,000 - 84,000
12 x 6 ft (72 sq ft): Rs 36,000 - 100,800
12 x 7 ft (84 sq ft): Rs 42,000 - 117,600
14 x 7 ft (98 sq ft): Rs 49,000 - 137,200

Ranges are material plus fabrication plus basic installation. Automation motors, laser-cut panels and premium hardware are quoted separately.

What Moves Your Gate Price Up or Down

Grade: SS 304 costs more than 202 but holds up in Dehradun humidity, monsoon and winter fog
Design density: every laser-cut pattern, extra rail or panel adds cutting and fitting time
Hardware: hinges, locks, wheels and automation-readiness are separate line items
Finish: mirror polish, brushed, powder-coat and black PVD all price differently
Site conditions: slope, access and civil work change installation cost

SS 202 vs SS 304: Where the Money Goes

SS 202: more affordable, fine for covered or low-exposure entrances and internal gates
SS 304: higher initial cost, stronger moisture resistance, recommended for open outdoor main gates
For boundary, villa and commercial entrances, SS 304 is the standard pick
No steel is 100 percent rust-proof; SS 304 is highly rust-resistant for Dehradun's climate

Full comparison: 202 vs 304 Stainless Steel: What You Are Actually Paying For.

What a Correct Quote Must Include

Material grade in writing (202 vs 304)
Pipe and sheet thickness in mm
Hardware brands and quantities
Installation and transport as separate lines
Warranty terms

If any of these is missing, you are comparing guesses, not quotes.

Hidden Costs to Watch For

Automation motor and its wiring, quoted separately
Powder-coating or PVD colour on top of the base finish
Removing and disposing the old gate
Core-cutting or civil work on a slope or odd wall
Premium locks and telescopic track for sliding gates

Frequently Asked Questions

Q1. How much does an SS gate cost in Dehradun?

Rs 500 to Rs 1,400 per sq ft. A common 10x6 ft gate lands between Rs 45,000 and Rs 200,000 installed, depending on grade, design and hardware.

Q2. Which grade is better for a main gate, SS 202 or SS 304?

SS 304 for open outdoor main gates, it resists moisture better in Dehradun's humidity. SS 202 is a fair budget choice for covered or internal gates.

Q3. How is a gate price calculated?

Rate per sq ft multiplied by gate area, then hardware, finishing and installation are added. A 10x6 ft gate is 60 sq ft.

Q4. Do automation motors cost extra?

Yes. Automation motors, wiring and remotes are quoted separately from the gate itself.

Q5. What should a written gate quote include?

Grade, thickness in mm, hardware brands, installation and transport as separate lines, and warranty terms.

Get Your Exact Number

The rate card gives you a budget; the site visit gives you a price. Book a free measurement and get a written, itemised quote valid 15 days: Get Free Quote. Related: SS Gate Price in Dehradun - Live Rate Card and Stainless Steel Gates Service. Call or WhatsApp +91 74096 66659.

SS Gate Price in Dehradun 2026: Rate Card