Stainless Steel Gates
Main gates, sliding gates, laser-cut gates and designer SS gates in Dehradun.
View Service →Home → Pricing → SS Gate Price
SS Gate Price in Dehradun — 2026 Rate Card
In Dehradun, stainless steel gates cost ₹500 to ₹1,400 per sq ft in 2026. A typical 10x6 ft (60 sq ft) SS main gate runs ₹45,000 to ₹200,000 installed. Designer, laser-cut, larger or automatic-ready gates can reach up to ₹2,00,000.
Updated: 15 September 2026
SS Gate Rate Card (2026)
Current rates published by STEELLY. Final quotation is confirmed after site measurement.
| Grade / Type | Rate (per sq ft) | Best For |
|---|---|---|
| SS 202 (covered / indoor) | ₹500 - ₹815 | Budget, covered entrances |
| SS 304 (outdoor standard) | ₹815 - ₹1,175 | Main gates, outdoor (recommended) |
| SS 304 designer / laser-cut | ₹1,175 - ₹1,400 | Designer, laser-cut, HPL/WPC |
How The Price Adds Up (Worked Examples)
A 10x6 ft gate = 60 sq ft. Here is how the total is built so there is no confusion.
| Example | Area | Material + Fabrication | Installed Total (with hardware + installation) |
|---|---|---|---|
| 10x6 ft, SS 202 (covered) | 60 sq ft | 60 x ₹500 = ₹30,000 | ≈ ₹45,000 |
| 10x6 ft, SS 304 (outdoor) | 60 sq ft | 60 x ₹950 = ₹57,000 | ≈ ₹122,500 |
| 10x6 ft, SS 304 designer | 60 sq ft | 60 x ₹1,400 = ₹84,000 | ≈ ₹200,000 |
| 16x8 ft, designer + automatic | 128 sq ft | Higher (design + motor) | Up to ₹2,00,000 |
Material + fabrication is rate x area. The installed total adds hinges, locks, wheels/track, finishing and installation. Automation motor is quoted separately. Final price is confirmed on the written quote after free measurement.
SS 202 vs SS 304: What You Are Paying For
| Factor | SS 202 | SS 304 |
|---|---|---|
| Budget | More affordable | Higher initial cost |
| Outdoor exposure | Better for covered / low-exposure use | Better for open outdoor gates |
| Moisture resistance | Moderate | Stronger in normal outdoor conditions |
| Best use | Budget projects, internal gates, covered areas | Main gates, boundary gates, villas, commercial entrances |
STEELLY does not claim any steel is "100% rust-proof". SS 304 is highly rust-resistant and is recommended for outdoor use in Dehradun's humidity.
SS Gate Price by Size — Dehradun 2026
Common gate sizes, calculated at ₹500–₹1,400 per sq ft. Ye material + fabrication + basic installation ka range hai. Automation, designer laser-cut panels aur premium hardware alag se lagte hain.
| Gate Size | Sq Ft | Typical Range | Best For |
|---|---|---|---|
| 7 x 6 ft | 42 | ₹21,000 – ₹58,800 | Single-car entry, small plot |
| 8 x 6 ft | 48 | ₹24,000 – ₹67,200 | Standard house main gate |
| 10 x 6 ft | 60 | ₹30,000 – ₹84,000 | Most common in Dehradun |
| 12 x 6 ft | 72 | ₹36,000 – ₹100,800 | Wide driveway, two-car |
| 12 x 7 ft | 84 | ₹42,000 – ₹117,600 | Bungalow, farmhouse |
| 14 x 7 ft | 98 | ₹49,000 – ₹137,200 | Commercial, society gate |
Rates updated 15 September 2026. Sliding gates need track and wheel work, so wo upper range me aate hain. Exact figure measurement ke baad written quote me milta hai.
What Affects Stainless Steel Gate Price?
- Gate size: Sabse bada factor. Rate per sq ft lagta hai, toh 8x6 aur 12x7 ke beech material ka farak lagbhag double ho jata hai. Height badhne pe framing bhi mota karna padta hai.
- SS grade (202 vs 304): SS 304 roughly 15–25% mehnga hai, lekin Dehradun ki monsoon humidity me khule gate ke liye yahi sahi hai. SS 202 covered porch ya inner gate ke liye theek hai. Grade hamesha quote pe likha hota hai.
- Sliding vs swing: Sliding gate me track, wheels aur guide roller ka extra kaam hota hai — aam taur pe 10–15% zyada. Lekin jahan driveway chhota hai, sliding hi practical hai.
- Design complexity: Plain vertical pipe design sabse sasta. Laser-cut jali panels, CNC patterns aur custom motifs cutting charge add karte hain — pattern jitna dense, utna zyada.
- Panel material: Open pipe design sabse sasta. HPL aur WPC panels privacy dete hain aur cost badhate hain. Toughened glass filling sabse upar aati hai.
- Finish: Mirror polish, brushed (matt), powder-coated aur black finish — sabke rate alag hain. Powder coating outdoor durability ke liye achhi hai, aur Dehradun me kaafi popular hai.
- Hardware: Hinges, locks, wheels, track aur stopper. Cheap hardware pehle saal me hi problem deta hai, isliye hum standard hardware quote karte hain aur naam likh ke dete hain.
- Automation readiness: Agar aage chalke motor lagwana hai to abhi se frame thoda strong banana padta hai. Motor khud alag se quote hota hai.
- Site condition: Pillar spacing, floor level aur wall strength fixing method decide karte hain. Purane ghar me kabhi-kabhi extra base work lagta hai.
Related Services and Pricing
SS Railing Rate per Foot
See balcony, staircase and handrail railing rates in Dehradun.
View Pricing →SS Gate Price FAQs
What is the SS gate rate per sq ft in Dehradun?
In Dehradun, stainless steel gate rates are usually ₹500 to ₹1,400 per sq ft. SS 202 (covered use) sits at the lower end, SS 304 designer/laser-cut at the higher end.
How much does a 10x6 ft stainless steel gate cost?
A 10x6 ft gate is 60 sq ft. Material + fabrication is Rs 30,000-84,000. Adding hardware, installation and finishing, the typical installed total is Rs 45,000-200,000. Larger, designer or automatic gates can reach Rs 2,00,000.
Which is better: SS 202 or SS 304 for gates?
SS 304 handles moisture and weather better, so it is recommended for open outdoor gates. SS 202 is a budget option for covered or low-exposure areas. The grade is always written on your quote.
Does the gate quote include installation?
STEELLY provides fabrication and installation support. The written quote states what is included - measurement, material, fabrication, basic hardware and installation. Automation motors are quoted separately.
देहरादून में स्टील गेट का रेट क्या है?
देहरादून में स्टेनलेस स्टील गेट का रेट 2026 में ₹500 से ₹1,400 प्रति स्क्वायर फुट है। 10x6 फुट का आम मेन गेट ₹45,000 से ₹200,000 में लग जाता है, जिसमें मटीरियल, फैब्रिकेशन और इंस्टॉलेशन शामिल है। डिज़ाइनर या लेज़र-कट गेट का रेट ज़्यादा होता है।
स्टील गेट का भाव प्रति फुट कैसे निकाला जाता है?
गेट का रेट प्रति स्क्वायर फुट लगता है, प्रति रनिंग फुट नहीं। लंबाई × ऊंचाई करके स्क्वायर फुट निकालिए। जैसे 10 फुट चौड़ा और 6 फुट ऊंचा गेट = 60 स्क्वायर फुट। उसे प्रति स्क्वायर फुट रेट से गुणा कीजिए। रेलिंग का रेट अलग तरीके से, प्रति रनिंग फुट लगता है।
SS 202 और SS 304 में कौन सा गेट के लिए सही है?
खुले में लगने वाले गेट के लिए SS 304 बेहतर है क्योंकि देहरादून की बारिश और नमी में यह जंग नहीं पकड़ता। SS 202 सस्ता पड़ता है और ढके हुए या अंदर की जगह के लिए ठीक है। STEELLY हर कोटेशन पर ग्रेड लिखकर देता है, ताकि आपको पता रहे कि किस चीज़ का पैसा दे रहे हैं।
Do gate prices change during monsoon in Dehradun?
The rate per sq ft stays the same, but monsoon affects two things. Installation slots get booked out because site work slows down, so lead time stretches. And for open outdoor gates during heavy-rain months we usually recommend SS 304 over SS 202, which raises the material cost slightly but avoids rust complaints in year two.
Can I get a rough gate price without a site visit?
Yes. Send the gate opening width and height on WhatsApp along with a photo of the entrance, and we can give a realistic range the same day. The written quote still needs a measurement visit, because wall condition, floor level and pillar spacing decide the framing and fixing method.
Get an Exact SS Gate Price in Dehradun
Share gate size, design idea or a photo. We will suggest the right grade and provide a practical written quote after measurement.