Home → Pricing → Aluminium Gate Price
Aluminium Gate Price in Dehradun — 2026 Rate Card
Aluminium profile gates in Dehradun cost ₹800-₹1,800 per sq ft in 2026. Plain horizontal-slat profile gates sit at the lower end; glass-filling and designer powder-coated gates sit at the top. Every quote is written and itemised after site measurement.
Indicative rates, final quote after site visit
2026 Rate Card
| Gate Type | Indicative Rate* | Notes |
|---|---|---|
| Plain profile gate (powder-coated) | ₹800 - ₹1,200 / sq ft | Horizontal/vertical slat profiles |
| Glass-filling aluminium gate | ₹1,200 - ₹1,800 / sq ft | Toughened/frosted glass infill |
| Designer / two-tone gate | ₹1,200 - ₹1,800 / sq ft | Two-tone powder coat, custom slats |
| Sliding + automation | Gate rate + motor quote | Operator selection follows the gate and site specification |
*Indicative rates. Final price depends on design, size, material and site conditions, and is confirmed in your written quote after a site visit. Gate site fitting is extra.
Aluminium vs SS — Lifetime Cost View
| Cost Factor | Aluminium | SS 304 |
|---|---|---|
| Upfront (same design) | Similar / slightly lower | Similar / slightly higher |
| Painting / rust treatment | Not needed against rust | Cleaning and finish care still required |
| Automation motor size | Selected for gate and site | Selected for gate and site |
| Weight (12 ft gate) | Lighter | Heavier |
| Best for | Residential designs and compatible automation | Wide / heavy commercial gate |
STEELLY makes both, so this comparison is neutral — we have no reason to push one over the other.
Aluminium Gate Price FAQs
What is the aluminium gate price per sq ft in Dehradun?
In 2026, aluminium profile gates in Dehradun run ₹800-₹1,800 per sq ft - plain profile at the lower end, glass-filling and designer powder-coated gates at the top. Final written quote after measurement.
Is aluminium gate cheaper than SS gate?
Compare quotations for the same size, infill, finish and installation scope. Aluminium is not automatically cheaper overall. Automation cost depends on the operator selected for the actual gate and site, and both materials need care.
What is included in the aluminium gate price?
Material (profile + infill), powder coating, hardware (hinges/wheels/locks) and fabrication. Site fitting and any automation motor are quoted separately.
देहरादून में एल्युमिनियम गेट का रेट क्या है?
देहरादून में एल्युमिनियम प्रोफाइल गेट का रेट ₹800 से ₹1,800 प्रति स्क्वायर फुट है। सादा प्रोफाइल गेट कम रेट में, और ग्लास फिलिंग वाला या डिज़ाइनर पाउडर-कोटेड गेट ऊपर के रेट में आता है। इसमें मटीरियल, पाउडर कोटिंग और हार्डवेयर शामिल है। साइट पर इंस्टॉलेशन का चार्ज अलग से लगता है।
एल्युमिनियम गेट सस्ता है या स्टील का?
शुरुआती रेट लगभग बराबर होता है, कभी-कभी एल्युमिनियम थोड़ा कम। पूरा खर्च साइज़, डिज़ाइन, फिनिश और फिटिंग पर निर्भर करता है, इसलिए एक जैसी डिटेल वाले दोनों कोटेशन मिलाकर देखें। एल्युमिनियम में लाल जंग नहीं लगती, पर कोटिंग की देखभाल ज़रूरी है।
क्या एल्युमिनियम गेट देहरादून की बारिश में चलेगा?
हां, एल्युमिनियम में लाल जंग नहीं लगती, इसलिए देहरादून की लंबी बारिश और नमी वाले मौसम के लिए यह अच्छा विकल्प है। ध्यान सिर्फ पाउडर कोटिंग की क्वालिटी पर देना चाहिए।
When should I choose steel over aluminium for a gate?
Steel makes more sense in three cases. Very wide gates above roughly 14 ft, where the span needs structural strength. Gates that take rough daily use, like commercial or society entries. And heavy solid-panel designs, where the weight itself demands a stronger frame. For normal residential gates up to 12 ft, aluminium performs well and needs less upkeep.
Get a Written Aluminium Gate Quote
Send gate size + design reference - itemised written quote within 24 hours.